Bitte beachten: Diese Seite ist nur auf Englisch verfügbar.

Twin Decorator systems reduces print changeover to just 5 minutes

08 Jul 2015

Pivotal development for the can manufacturing industry

The aluminum tube and monobloc aerosol can industries are confronted by decreasing “batch sizes” down to 25,000 units or less. Small batch sizes are challenging as each batch requires a set-up of the printing machine (and often no other machine in the line). Printer changeover times, depending on the skill/experience of the operator and the complexity of the changeover, may take as much as 3-4 hours. The pressure on operators to start producing often leads to scrap, and the idling of other machines during the print changeover.

PackSys Global’s installed and commissioned “Twin Decorator” is the answer to these challenges. The Twin Decorator is an intelligent, robust and easy to operate system which reduces print changeover times to as little as 5 minutes. This significantly reduces downtime and increases efficiency by allowing an increased output of between 25-80% depending on the line speed, batch sizes and currently required print changeover times.

This revolutionary system for monobloc aerosol cans and aluminum tubes uses a second printer, complete with drying oven, connecting the whole system in an intelligent way such that the rest of the line should not need to stop anymore for a print change. Besides the additional decorator, the patented system comprises automatic transfers and bypass systems. These allow a new print job to be set up independently from the actual running batch. Cans are printed and quality can be approved by the QC team before the next batch is started - all this without interrupting customers’ ongoing production.

Applying Twin Decorator technology to existing medium speed aerosol can and aluminum tube production lines allows manufacturers to match the output of new, higher speed lines due to the higher efficiency rates which are the result of largely eliminating print changeover times.


Weitere Nachrichten

Das könnte Sie auch interessieren

17 Mär 2020

Coronavirus – aktuelle (Liefer)-Situation von PackSys Global AG und Tochterunternehmen Combitool AG, Texa AG und Madag Printing Systems AG

Bedauerlicherweise breitet sich das Coronavirus mittlerweile weiter aus und es ist davon auszugehen, dass dadurch Logistikaufgaben, Reisen und Arbeiten in den kommenden Monaten schwieriger planbar werden.
17 Mär 2020

Neuer Vice President Operations bei PackSys Global

Anfangs März 2020 durften wir Basil Sohrmann als unseren neuen Vice President Operations in der PackSys Global in Rüti herzlich begrüssen.
19 Feb 2020

Die ADF & PCD und PLD Messe in Paris

Wie jedes Jahr fand die zweitägige AEROSOL & DISPENSING FORUM (ADF) und die PACKAGING OF PERFUME COSMETICS & DESIGN (PCD) Show im Messegelände Paris Expo Porte de Versailles statt.
09 Okt 2019

Highlights an der K 2019

PackSys Global Gruppe an der K 2019 in Düsseldorf  
23 Aug 2019

Gemeinsames Projekt: Neubau Waldau von PackSys Global AG und Combitool AG in Rüti an der Spitalstrasse

Der Spatenstich am 23. August 2019 ist der Beginn für die neue gemeinsame Zukunft von PackSys Global AG und Combitool AG.   
Win-Win Geschäft: Dr. Axel von Wiedersperg, Managing Director/CEO Brückner Group GmbH (links) und Roman Angst, CEO Benpac Packaging ltd. (rechts) zusammen mit dem Benpac Packaging Team.
02 Mai 2019

PackSys Global verkauft thailändischen Standort an die Benpac Holding

Win-win Geschäft zwischen Schweizer Firmen
01 Mai 2019

Management changes at PackSys Global

Beat Rupp takes over the post of CEO of PackSys Global AG on May 1, 2019, succeeding Dr. Manfred Zurkirch.  
08 Mär 2019

Indiaplast 2019 was a big success

Indiaplast 2019 provided the opportunity to showcase the state-of-the-art know-how technology and reflected every organization’s commitment to the plastic industry.
14 Feb 2019

New Managing Director at MADAG Printing Systems AG

03 Mai 2018

Chinaplas 2018 – a successful show ended on 27th April 2018

Accompanying the growth of China’s plastics and rubber industries for over 30 years, Chinaplas has become a distinguished meeting and business platform for these industries.